<!-- GENERATED EXAMPLE — demonstrates the format produced by the cst toolkit from the example I/O list. Adapt to your project and review before use. -->

# FAT Protocol — CP-01

| Project | Example Skid | Document rev | ___ |
|---|---|---|---|
| Test type | FAT | Date | ___ |
| I/O count | 13 (DI: 5, DO: 3, AI: 3, AO: 1, RTD: 1) | Location | ___ |

## 1. References

- [ ] Approved electrical drawings (rev ___)
- [ ] I/O list (rev ___)
- [ ] Wire/terminal schedule (rev ___)
- [ ] Functional/sequence description (rev ___)

## 2. Visual and construction inspection

- [ ] Panel construction matches approved drawings (layout, devices, ratings)
- [ ] Nameplate present and complete: supply V/ph/Hz, FLA, SCCR, diagram no.
- [ ] Disconnect operation, door interlock, lockable in OFF
- [ ] Wire numbers and terminal labels match the wire schedule
- [ ] PE bonding: sized per standard, no daisy-chains, continuity verified
- [ ] Segregation: power / control / analog routing per design
- [ ] Torque marks on power terminations
- [ ] Enclosure rating unbroken (unused openings sealed, gland plates fitted)

## 3. Point-to-point verification

Execute the individual loop test sheets; record completion here.

| I/O type | Points | Sheets complete | Punch items |
|---|---|---|---|
| DI | 5 |  /5 |  |
| DO | 3 |  /3 |  |
| AI | 3 |  /3 |  |
| AO | 1 |  /1 |  |
| RTD | 1 |  /1 |  |

## 4. Functional tests (project-specific)

| # | Test | Reference | Result | Pass |
|---|---|---|---|---|
| 1 | E-stop / safety circuit function |  |  | ☐ |
| 2 | Power-loss / recovery behavior |  |  | ☐ |
| 3 | Sequence per functional description |  |  | ☐ |
| 4 | Alarms and interlocks |  |  | ☐ |

## 5. Punch list

| # | Item | Category (A/B/C) | Owner | Closed |
|---|---|---|---|---|
|  |  |  |  |  |

## 6. Sign-off

| Role | Name | Signature | Date |
|---|---|---|---|
| Vendor |  |  |  |
| Customer |  |  |  |