Servo & Motion Control Manufacturers
Servo drive/motor families and CNC / machine-tool motion platforms.
Curated list of major and notable vendors — absence means nothing, and inclusion is not endorsement. Ownership, branding, and availability change; confirm with the manufacturer. See the directory notice.
Vendors
| Manufacturer | Region | Notable families | Typical protocols | Notes |
|---|---|---|---|---|
| ABB | Europe | machine and motion-control drives | — | — |
| B&R Industrial Automation | — | ACOPOS | POWERLINK | — |
| Baumüller | — | b maXX | — | — |
| Beckhoff | Europe | AX, AMP servo systems | EtherCAT | also CNC / machine-tool control |
| Bosch Rexroth | Europe | IndraDrive, ctrlX DRIVE | EtherCAT, Sercos | also CNC / machine-tool control |
| Delta Electronics | Taiwan | ASDA | — | — |
| Elmo Motion Control | — | Gold, Platinum | — | — |
| Fagor Automation | — | — | — | CNC / machine tool |
| FANUC | — | — | — | CNC / machine tool |
| Heidenhain | — | — | — | CNC / machine tool |
| KEB Automation | — | COMBIVERT | — | — |
| Kollmorgen | — | AKD, AKD2G | EtherCAT | — |
| Lenze | — | i700, servo systems | — | — |
| Mitsubishi Electric | Japan | MELSERVO | CC-Link IE, SSCNET | also CNC / machine-tool control |
| Moog | — | high-performance motion-control systems | — | — |
| NUM | — | — | — | CNC / machine tool |
| Okuma | — | — | — | CNC / machine tool |
| Omron | Japan | 1S, G5 | EtherCAT | — |
| Panasonic Industry | Japan | MINAS | — | — |
| Parker Hannifin | — | Compax3 | — | — |
| Rockwell Automation | North America | Kinetix | EtherNet/IP | — |
| Schneider Electric | Europe | Lexium | — | — |
| SEW-EURODRIVE | — | MOVI-C, MOVIDRIVE | — | — |
| Siemens | Europe | SINAMICS S, SIMOTICS | PROFINET | also CNC / machine-tool control |
| Syntec Technology | — | — | — | CNC / machine tool |
| Yaskawa | — | Sigma series | MECHATROLINK, EtherCAT | — |
Selection Notes
Selection notes specific to motion:
- Controller-drive pairing dominates: most platforms perform best (or only work fully) with their own motion controller and network (e.g. deterministic Ethernet variants).
- Registration, camming, and gearing features differ sharply between families — list the required motion functions before comparing.
- Encoder/feedback compatibility and cable systems are proprietary more often than not; budget accordingly.
- Commissioning guidance lives at servo commissioning.
This site is an independent educational reference for industrial automation standards. It paraphrases and organizes guidance in original language; it is not a substitute for the official published standards, professional engineering judgment, or legal review, and content has not been independently verified against current published editions.
Items marked Review pending await technical review against the identified edition. Items marked Planned have no reviewed source material behind them. Do not rely on this site for compliance determinations, safety-critical design decisions, or legal interpretation.